By Jovan K
You can’t help but wonder why the new Submersible GMT PAM01495 wasn’t at Watches & Wonders, because let’s be honest, this thing would’ve stolen the show from the rest of Panerai’s novelties without even trying.
At 47mm, it’s everything you expect from a modern Submersible, but the way the case is made is what really sets it apart. Panerai uses DMLS (Direct Metal Laser Sintering), basically building the grade 5 titanium case layer by layer from powder, almost like 3D printing. It’s not just for show either, this process allows for more complex internal structures, which means less material where you don’t need it and strength where you do. The result is a case that’s around 25% lighter than standard titanium and more than 50% lighter than steel.
The finish is fully sandblasted, keeping everything matte and tool-focused, while the unidirectional anti-clockwise bezel in titanium with a blue ceramic insert stays true to the dive DNA. The crown protection bridge is still there, still doing its job, still making sure you instantly know what you’re looking at. It stays in that tool watch lane the whole time. And despite everything going on visually, it still delivers where it matters. Water resistance is rated to 500m, tested with an additional 25% safety margin, including vacuum and pressure simulations.
The dial could have easily been too much, but it’s done properly by Panerai. The skeletonized structure uses a grid pattern inspired by maritime nets, which gives depth without losing clarity. Applied indexes with Super LumiNova keep it readable, with blue lume for the bezel and minute track and green for the rest, which actually helps separate information in low light. The small seconds sit at 9 o’clock with an AM PM indicator, while the GMT hand in bright orange tracks a second time zone cleanly. Even the date is different here, as Panerai uses a patented polarized system at 3 o’clock that keeps the date disc almost invisible until it aligns with the aperture, so it doesn’t block the view of the movement underneath.
This is one of those watches that commits to what it is: large, technical, and a bit over the top, but all of it makes sense once you spend time with it.
Flip it over, and you get a clear view of Panerai’s in-house P.4001/S self-winding calibre through the open caseback, and this is where it stops being just a cool-looking watch and actually becomes a serious piece. The skeletonized movement is made up of 341 components, 31 jewels, running at 4Hz (28,800vph) with a 3-day power reserve delivered by twin barrels, with energy supplied by an off-center micro-rotor in tungsten that keeps the architecture visible.
Functionally, it’s stacked in a way that actually makes sense. You’ve got hours, minutes, small seconds, GMT with a second time zone, AM PM indication, a power reserve indicator on the back, plus a seconds reset for precise setting. It’s not just complexity for the sake of it; it’s all usable.
The Panerai Submersible GMT PAM01495 comes on a blue rubber strap, with an additional rubber and textile option if you want to switch things up, both fitted with a trapezoidal titanium buckle that matches the sandblasted case.
The price lands at $50,300, which is serious money. It’s a lot of watch, and honestly, it feels like Panerai knew what they were doing from the start.
Explore more at Panerai
